What if geothermal systems could heat your home in winter, cool it in summer, and provide abundant hot water all year round, all while cutting your utility bills up to 80? How?
By installing a Geothermal central heating and air conditioning system in your home.
A. How does Geothermal Heating and Cooling Work
Here’s how it works:
Wherever you live, the temperature beneath your home remains constant, regardless of the season. Just a few feet down, the earth is a consistent ClimateMaster Geothermal Heat Pump Systems harness the stable underground temperature to provide heating, cooling, and hot water at remarkably high efficiencies.
So high, in fact, that energy use can be cut by up to 80 percent. To access this stable underground temperature, a geothermal heat pump is connected to a series of underground loop pipes. These pipes are made from an extremely strong and long-lasting material.
Water, usually mixed with an environmentally safe antifreeze solution, is pumped through this loop pipe system.
In summer, the heat pump takes heat from the air in your home, transfers it to the underground loop system, which then radiates the heat away into the cool earth. Now cooled to a comfortable temperature, the air is circulated through your home using a traditional duct system.
In winter, the system is reversed. Heat is extracted from the ground using the same loop system. In the heat pump, the heat from the underground loop is compressed to a much higher temperature and used to warm the air in your home.
Since the geothermal system uses and earth loop to provide your home with heat in the winter, there is no need to burn any fossil fuel for heating. No flame, no carbon monoxide and environmentally friendly, geothermal systems are the smart way to heat and cool your home.
B. Geothermal Heating and Cooling System
Let’s compare a high-efficiency gas furnace to a geothermal system for heating your home. A high-efficiency gas furnace will give you less than .96 units of heat for each unit of gas burned. In contrast, a geothermal system gives you up to FIVE units of heat for each unit of electricity used.
How can that be?
A furnace makes heat by burning fossil fuel. A geothermal system doesn’t make it’s own heat. It simply collects heat from the earth and moves it to your home.
Now let’s compare a geothermal heating and cooling system to an air-source heat pump for cooling. When it’s hot outside, an air-source heat pump takes heat from your home and moves it to the outside air.
As the outside air becomes warmer in summer, it becomes harder and harder for the system to dump heat from your home into the already hot outside air. Because of this, when cooling the home with an air-source heat pump, the system becomes least efficient when it needs to be most efficient.
C. How a Heat Pump Works
A geothermal heat pump system doesn’t have this problem. A geothermal system exchanges the heat in your home with the cooler ground, using it’s underground loop system.
It simply doesn’t have to deal with high outside air temperatures the way an air-source heat pump does. Add to this the fact that a geothermal system is installed safely inside your home with a loop buried under ground. Unlike an air-source heat pump, there is no outdoor equipment exposed to the elements or the risk of vandalism.
Let’s take a look at geothermal loop systems. There are several different ways to install a geothermal loop system. Where space allows, horizontal loop are the most cost-effective loop design for most home owners. If space is limited, a vertical loop system is often the best choice.
If a nearby pond or lake is available, a coiled loop system can be used. This is the fastest, easiest loop system to install.
If a well is available that produces sufficient volumes of water, and open loop system can be installed. An open-loop system takes water from the well, pumps it through the heat pump system, and then returns it to the environment in a responsible, renewable manner.
And geothermal systems don’t just heat and cool your home. They can also provide you with hot water. Besides a nice shower and washing your hands, you can use the large volumes of hot water a geothermal system can produce for radiant under floor heating or even for show and ice melt under your walk ways and driveway.
D. Geothermal Installation Cost
A geothermal central heating and air conditioning system from ClimateMaster can be installed in almost any home, new or existing. They can be installed in an attic, garage or utility closet. Or in the case of a retrofit installation, they can even be installed in place of an old, outdoor air conditioning compressor section.
There are even more ways to save with a ClimateMaster Geothermal system than just lowering your utility bills. You can save up to 30 percent off the total cost of installing a ClimateMaster geothermal system with a federal tax credit.
Additionally, many states and local governments and utilities also offer incentives for installing a geothermal system. As the world’s largest and most progressive leader in clean, renewable geothermal technology For more than 50 years ClimateMaster has designed and manufactured industry-leading heating and cooling equipment for the commercial and residential construction market world-wide.
Visit us at climatemaster.com to learn more about geothermal central heating and air conditioning systems.
Source: youtube.com/watch?v=lY3oGlgZRgIYou can download all 0 of 4 Cool Ways Geothermal Heating & Cooling for Home Works image to your laptop by right clicking picture and then save image as. Do not forget to share if you love with this picture.